This is a progress report of small craft room ideas in my craft room. It’s the fourth in a series of instalments on the making of a craft studio. In my first post, I reached out to fellow bloggers and readers on Hometalk to help me decide the final layout of my craft studio. Even though it’s still far from being finished, the jury is in on the layout.
All I can say is that packing up my old studio and moving to the new space has been eye opening:
Upcycling in the Mix
Because every piece of storage is a previously loved item, it’s taken a while to finalize the layout! Coming up with a functional layout with mismatched pieces is way more challenging than starting from scratch. However, I get satisfaction in seeing whether I can make it work. And saving perfectly usable items from the landfill! So I’m figuring out a way to make my storage pieces cohesive. Once the final electrical inspection is complete, installing them is priority #1.
Here is the final layout:
Craft Storage Ideas for Small Spaces
I have not one, but two card catalogues. That’s so I can keep all the smaller stuff organized! We already have the first one in place in the sewing room under the window (between my two industrial sewing machines). After making fresh number cards, I now have to create all my lables. There are 40 drawers in this one to play with. But if it’s still not enough all the overflow will go into the second card catalogue if necessary.
I’m having some fun styling the top; Hubs surprised me with the red letter ‘S’. But instead of hanging it, I like the way it looks on its side:
Card Catalogs as Storage
The second card catalogue is walnut. In contrast to the oak catalogue, it’s in rough shape. It was in a garage for many years. It has the exact same pulls. However they are silver in colour as opposed to brass – and they’re a mess. It’s going to take a lot of TLC to whip this one back into shape.
Because it’s so heavy and it would be difficult move it down stairs, we were originally going to cut it down and make two pieces (like this blogger did). However, I don’t really have enough floor space for two pieces, so it will remain intact.
In order to could give the pull a thorough cleaning, we’re taking all the drawers apart and removing them.
Here’s one of the pulls before and after it restoring. A big improvement, don’t you think? Only another 59 to go 🙁
Once those are done, we can look forward to sanding 60 drawer fronts and the rest of the cabinet!
Small Craft Room Ideas – Desk
For the office area of the studio, I’m planning on upcycling the door that used to be on our cold room into a floating desk – as well as a floating shelf. In a previous post of our basement reno (Ultimate Guide to Tiling a Laundry Room Backsplash) you’ll notice we’re using this door as a table, with the addition of sawhorses:
The door is 80″ high by 32″ wide. We’ll cut it into two pieces along the length and use a 20″piece as a floating desk. As shown in the rendering below, I may use the remaining 12″ piece as a long floating shelf. Or I may use it under the window.
I’ve been mulling over whether I should top off the ‘desk’ with some left over plank flooring. I don’t like the leather flooring shown below, but I’d like to add in a herringbone pattern somewhere. For some reason, I just love herringbone. So the desk top may be the place to experiment!
If you read the DIY I posted recently on this paint chip portrait I created of my husband, you may recall that I wanted to relocate it to my studio. Where I propped it below is a great sight line as I enter. What could be better than my husband’s smiling face to greet me! He’s always an inspiration and that’s just what I need in my craft room space 🙂
The only fly in the ointment is a long floating shelf you see in the rendering two pictures above. Unfortunately, I can’t have both. Even the really cool shelf we found at an auction will fit perfectly into the space between, but will still impede on the paint chip portrait :(. Too bad the portrait isn’t a bit smaller!
Craft Room Lighting
Lighting is an important consideration when it comes to small craft room ideas. Did you spy the green light fixture on the pass-through window ledge above? I have a pair that we’ll be installing over the sewing machine and serger. At first, they were rusty and crusty – just waiting to be beautiful again. They’re a wonderful vintage addition to the studio that I can’t wait to hang!
Small Craft Room Ideas – Shelving
Here’s that other shelf I mentioned earlier; it used to be part of someone’s hutch. I bought it at an auction for only $5 because it was so sad looking that no one could see the potential. Hubs didn’t like it either, but he still stripped and refinished it for me! Should I use it instead of the paint chip portrait of hubs or elsewhere? Decisions, decisions!
The shelf would also look good in the sewing room over my serger where I can arrange some of my serger threads on it – so that might be a practical solution for where to place it.
Here’s a rendering looking into the sewing room with the shelf over the serger.
For now, the shelf is sitting on the floor in the sewing room while I try to imagine how it will look and decide where it will would look best – or even fit into the space!
Until the lower cabinets are installed and the sewing machines moved from my old studio, I’ll probably defer the final placement until then.
I used pegboard in the space where the mirror once so I can hang some of my essentials – scissors etc. Hubs painted the pegboard orange to match the colour of accent paint I may use for my pocket doors (seen below).
A discussion on small craft room ideas wouldn’t be complete without colour! Thinking of the bottle green and the orangey stain on my maple cabinets, I chickened out from my original plan (as you’ll see below) and changed my accent colour from teal to orange. I figured orange would be a great complimentary colour to the green shade of the light fixtures and base of my pattern table. Hubs painted up a scrap of the pegboard for the shelf so I could carry it around with me and determine if I like it enough for the doors:
It’s funny how I have no problem choosing paint colours for everyone else, but when it comes to my own projects it’s so hard!
There are so many variables to consider in selecting the accent colour: the flooring, the colour of the hand-me-down maple cabinets (which could be painted, but I like the wood), and the color of my card catalogues (again, I don’t have the heart to paint over the wood). They all have to work with whatever I choose as an accent colour. In retrospect, I really should have started with an inspiration board and stuck with it – even if it meant painting things I don’t want to!
The neutral space really needs a pop of colour and I’ve always loved this teal that I found adorning the doors of a retailer in a U.S. mall. The picture doesn’t really do the actual colour justice! I’m not even a huge fan of teal, but in real life this particular teal is the best balance between blue and green that I’ve ever come across.
I’ve been wanting to use this teal from the get-go, but it would have to be a custom mix. Because of that, I was nervous about how close to my expectations it would turn out. It also clashes with my bottle green light fixtures and pattern table base. Ultimately, I don’t want to paint either of those because I like the durable enamel /powder coat finish on the metal.
The orange you saw above on the pegboard was supposed to be more crimson and have more depth. Strangely enough, even though I chose a pre-formulated colour and had it mixed by a paint expert, it didn’t even come close to the colour on the paint chip. The paint store tried to fix it, but it still isn’t quite what I wanted. Since my husband bought the base coat from a different supplier, I thought we’d be stuck with it. Turns out that the other supplier happily provided a new base – free of charge – even though they had nothing to do with colourizing it. Phew!
Now that I have a second chance I’m wondering whether I should reconsider the teal again. I know it’s only paint, but I don’t want to make a career out of painting – or repainting – stuff either!
I’ll have to give this accent colour some further thought! Leave me a comment and let me know if you would stick with the orange or change the accent to teal… or another colour altogether!
Craft Room Storage Ideas
For more storage, I’m adding these two drawer units into the craft studio/office area. They used to be a temporary storage solution for our kitchen before we renovated:
Our contractor would’ve thrown the cabinets into the dumpster but I couldn’t let perfectly usable storage go to waste. We never did put drawer faces on the two units, so that’s something we’ll have to get around to doing for my studio! I have something very special and incredible planned for them that no one else has ever done! You won’t want to miss my final reveal for that alone!
I also designed, and my husband built, this amazing pullout for our kitchen that never got used. It’s a more upscale version of the pullout we built in our new kitchen. One side has metal pegboard, so I can store my tools, and the other side has baskets for craft paints and such! Again, we’ll have to add a face onto it to match what we’re doing with the rest of the cabinets.
Lastly, if I have any floor space left over after all this, I’m thinking about using at least one, if not both, of these retail metal retail racks. These were a real coup when another bro-in-law moved retail locations and he kindly let me have them. They were handy in my old studio so I hope I have room for them in my new space 🙂
Hope you enjoyed these small craft room ideas. As you can see, the craft studio is still a real work in progress. We have to get our final electrical inspection done before we can do much more. I can’t wait to lift all the cardboard off the floor and show you the outcome when it’s done. Until then you might be interested in catching up on my previous posts in the Making of a Craft Studio series:
- The Making of a Craft Studio– Calling All Crafters: Help Me Decide the Best Layout for my New Studio
- The Making of a Craft Studio (II)– Design Your Space Using Ikea’s Pax Planner!
- The Making of a Craft Studio (III) – If You Build It, She Will Come!