Laminate Edging – DIY Storage Shelf

Laminate edging (or melamine edging) is the finishing touch for an easy DIY storage shelf. An easy clean white laminate shelf is an ideal addition to any cabinet or niche. You’ll have more storage space in no time!

Hubs upcycled this old tool cart into something special. What that ‘something special’ is won’t be fully revealed until my next post. However, in the interim we’re going to show you how to construct and insert a laminate shelf into a cabinet for more storage space.

Here’s how the cart looked before Hubs sanded, filled in all the dings and repainted it:

thumb_R0012606_1024_bof

Below is how the interior looks now (but there’s an even better surprise to come next week)! The shelf we installed increased this cabinet’s storage potential greatly.  To make the shelf, you’ll need a white laminate panel, iron-on edge tape to match the colour of your shelf (we used white laminate), scissors, an iron, rubber roller and file.

Laminate edging is an easy DIY if you want to add a shelf to any cabinet or niche. You'll have more storage space in no time! Birdz of a Feather | melamine edging | laminate edging diy | white laminate shelf | shelf ideas | add a shelf to a cabinet extra storage | extra storage ideas | extra storage ideas diy | extra storage cabinets

Materials for Laminate Edging

* [If you’re looking for some of the things we used, we’ve got you covered (disclosure): Clicking on the affiliate links below means we may receive a commission. But don’t worry, you don’t pay a cent more and it helps us create more DIYs to share with you! Thanks for helping to support our blog!]

You will need:

Hubs had some leftover laminate board from a 4′ x 8′ sheet he used for a previous project. To start, mark the board to the depth you want (ours is 10 3/8″) and length. Deduct 1/8″ from the length measurement for clearance on the sides and cut out the shelf. Hubs used his circular saw with a straight edge clamped to the board to get a straight cut.

At this point, you’ll have raw press board on the outside edges and will need to apply some iron-on tape. We only did the front edge, but you could also do the sides if you choose. Since you don’t see the back, it isn’t necessary to edge it with the tape.

Apply Laminate Edging

Clamp the shelf into a workbench.

Shelf and edging 002_bof

Cut a piece of iron-on edge tape slightly longer than the length of the shelf (you’ll file all the excess off later).

Laminate edging is an easy DIY if you want to add a shelf to any cabinet or niche. You'll have more storage space in no time! Birdz of a Feather | melamine edging | laminate edging diy | white laminate shelf | shelf ideas | add a shelf to a cabinet extra storage | extra storage ideas | extra storage ideas diy | extra storage cabinets

Test it for fit.

Shelf and edging 009_bof

Iron On Laminate Edging

Heat up an iron to high and place the tape glue side down over the edge; centre it so that it overlaps slightly along all edges.

Laminate edging is an easy DIY if you want to add a shelf to any cabinet or niche. You'll have more storage space in no time! Birdz of a Feather | melamine edging | laminate edging diy | white laminate shelf | shelf ideas | add a shelf to a cabinet extra storage | extra storage ideas | extra storage ideas diy | extra storage cabinets

Apply the iron to the tape and keep it moving to melt the glue. Make sure you get all the edges and don’t stay too long in any one area or you’ll run the risk of burning or melting it!

Laminate edging is an easy DIY if you want to add a shelf to any cabinet or niche. You'll have more storage space in no time! Birdz of a Feather | melamine edging | laminate edging diy | white laminate shelf | shelf ideas | add a shelf to a cabinet extra storage | extra storage ideas | extra storage ideas diy | extra storage cabinets

When ironing is complete, apply pressure along the length with a roller to ensure good adherence.

Laminate edging is an easy DIY if you want to add a shelf to any cabinet or niche. You'll have more storage space in no time! Birdz of a Feather | melamine edging | laminate edging diy | white laminate shelf | shelf ideas | add a shelf to a cabinet extra storage | extra storage ideas | extra storage ideas diy | extra storage cabinets

Let it cool completely before moving onto the next step. Here’s how it will look before the extra material is filed away:

Laminate edging is an easy DIY if you want to add a shelf to any cabinet or niche. You'll have more storage space in no time! Birdz of a Feather | melamine edging | laminate edging diy | white laminate shelf | shelf ideas | add a shelf to a cabinet extra storage | extra storage ideas | extra storage ideas diy | extra storage cabinets

Trim Laminate

There are power tools you could use to trim away the extra material, but Hubs goes ‘old school’. At any rate, take a fine file or rasp and run it at an angle in a downward/forward motion along the edge of the tape. Continue filing off the extra material along all edges until the tape is totally flush with the shelf.

Laminate edging is an easy DIY if you want to add a shelf to any cabinet or niche. You'll have more storage space in no time! Birdz of a Feather | melamine edging | laminate edging diy | white laminate shelf | shelf ideas | add a shelf to a cabinet extra storage | extra storage ideas | extra storage ideas diy | extra storage cabinets

Be cautious when filing at the ends; ours wasn’t quite glued down and we had to iron it again to reactivate the glue before proceeding. If it’s not glue down properly you could accidentally rip a chunk off and expose the fibreboard underneath, which would be difficult to disguise.

Laminate edging is an easy DIY if you want to add a shelf to any cabinet or niche. You'll have more storage space in no time! Birdz of a Feather | melamine edging | laminate edging diy | white laminate shelf | shelf ideas | add a shelf to a cabinet extra storage | extra storage ideas | extra storage ideas diy | extra storage cabinets

Determine Shelf Support Height

Take the shelf out of the clamp and then proceed with installing shelf supports into your cabinet using these; you’ll need four supports per shelf. We got ours at Home Depot in a package of eight.

Jewellery Cabinet 018_bof.jpg

Measure for the height you want the shelf. We put a line of green tape, then measured two holes equally from the front and back on each side.

Jewellery Cabinet 012_bof2

Before Hubs drilled the four pilot holes, he added some green tape to the drill bit to ensure he wouldn’t drill too deep (measure it against the shelf support pin).

Laminate edging is an easy DIY if you want to add a shelf to any cabinet or niche. You'll have more storage space in no time! Birdz of a Feather | melamine edging | laminate edging diy | white laminate shelf | shelf ideas | add a shelf to a cabinet extra storage | extra storage ideas | extra storage ideas diy | extra storage cabinets

Hubs switched to a wider bit (to match the circumference of the shelf support pin) and drilled a left over piece of scrap board to make sure the shelf supports were going to fit properly into the hole:

Jewellery Cabinet 022_bof.jpg

Add Shelf Supports

He tested it with a shelf support to make sure the fit was good:

Jewellery Cabinet 023_bof.jpg

Apply some green tape to the new bit to mark the depth to drill (as you did with the pilot hole).

Laminate edging is an easy DIY if you want to add a shelf to any cabinet or niche. You'll have more storage space in no time! Birdz of a Feather | melamine edging | laminate edging diy | white laminate shelf | shelf ideas | add a shelf to a cabinet extra storage | extra storage ideas | extra storage ideas diy | extra storage cabinets

Re-drill the pilot holes with the wider bit and insert a shelf support into each hole.

Laminate edging is an easy DIY if you want to add a shelf to any cabinet or niche. You'll have more storage space in no time! Birdz of a Feather | melamine edging | laminate edging diy | white laminate shelf | shelf ideas | add a shelf to a cabinet extra storage | extra storage ideas | extra storage ideas diy | extra storage cabinets

Rest the left side of the shelf onto the shelf supports with the other end angled upward. Then slide the right side over the supports until it snaps in place. If the shelf is too tight to lower into place, you forgot to leave the 1/8″ clearance – that’s what gives it enough play to install it. You’ll have to shave a bit off and try again.

Laminate edging is an easy DIY if you want to add a shelf to any cabinet or niche. You'll have more storage space in no time! Birdz of a Feather | melamine edging | laminate edging diy | white laminate shelf | shelf ideas | add a shelf to a cabinet extra storage | extra storage ideas | extra storage ideas diy | extra storage cabinets

And there you have it – a new shelf with professional looking laminate edging! I can’t wait to show you the final reveal in my next post! Hint: this makeover is for the gals out there (and no, we didn’t turn this into a bar cart; that would be too expected)!

Until next time, here are a few other storage ideas we’ve completed:

Subscribe and Pin

Follow our blog here as Hubs and I continue to feather the nest… one room at a time. You can also follow us on PinterestFacebookYouTube and Instagram. Pinning is always welcome and appreciated.

UPDATE: click here for the final tool cabinet makeover reveal!

 

SaveSave

3 thoughts on “Laminate Edging – DIY Storage Shelf

Leave a Reply